SKY COURSE PLAST
High Polymer based Ready Mix Plaster
SKY TOUCH Ready Mix Plaster is a ready mix plaster reinforced with Fiber, ready to use plastering mortar for internal & external plastering purpose. It is convenient, easy to use, strong and binds better to its substrate. This product is composed of good quality cement, properly selected aggregates, Fibers & additives.
Its well graded aggregates which are clean and silt free ensure that the plaster has a very cohesive and smooth finish. The waterproofing, Damp proof and bonding polymers give the plaster a better bonding with water tight characteristic. SKY PLAST Ready Mix Plaster also content HYDRATED LIME for more life of plaster.
SKY TOUCH Ready Mix Plaster reduces material wastage due to less rebound of the material. It reduces the drying and shrinkage cracks.
Features and Benefits
Crack free & firm surface that preserves beauty of building for longer time.
Factory made product with consistent quality. Very less rebound loss.
Excellent waterproofing characteristics
Ready to use, only clean water to be added at site.
Better bond than conventional cement based mortar Improved labor productivity hence reduces costs.
Moisture resistant - Offers excellent resistance to moisture ingress.
Good mechanical strength.
Sufficiently flexible to accommodate thermal & physical movement.
Areas of Application
Plastering on block work, brick work and concrete substrates in new construction.
External and Internal plastering application for repair and rehabilitation works.
Coverage
For best results, proper tools for mixing and application is advised which will result in higher coverage, savings in time and manpower.
Coverage is based on smoothness and evenness of the substrate, size of blocks used and the thickness of mortar used. A general guide line for coverage of mortar is given when used with 30% Water is added to powder.
The thickness of plaster considered is approx 12MM in the below calculation.
Technical Data
Packaging
40kg BOPP laminated bags.
Storage / Shelf life
SKY READY MIX PLASTER should be stored in a dry place. Shelf life is 12 months.
Usage Instruction
Surface Preparation
The surface must be cleaned thoroughly, with no loose particles or dust.
The surface must be structurally sound, clean and free from dirt, oil, grease, efflorescence and any other contaminant which could impair the natural bond.
Surface defects such as cracks, holes or voids should be repaired prior to application.
Surface must be whetted before plastering.(only required sprey of water to surface)
Mixing
It is very important that SKY READY MIX PLASTER is mixed with water properly and thoroughly before use.
It is advisable to use a mechanical Mixer for uniform and thorough mixing to save time, labour and for maximum workability.
Mixing Ratio - Clean potable water (approximately 25%-30%) of the weight of the powder is required to be mixed depending upon the thickness of the product to be applied. Water is to be incrementally added in stages to get a smooth, uniform and workable mix. Allow ample of time for initial mixing.
The sky ready mix plaster is now ready for application.
Precautions
Though it contains non-toxic materials but still care should be taken to avoid dust inhalation while mixing and handling. In case of contact with eyes or mouth, wash with plenty of clean water.
Keep it in a safe dry place which is out of reach of children.
Persons who are allergic to cement should take proper precautions before use.