SKY GRANITO

SKY GRANITO Tile Adhesive , mono-component, high performance, flexible, lightweight, cementitious adhesive with no vertical slip and long open time, low dust technology and extremely high yield.

A highly polymer modified, high performance thin set adhesive, for tiles, mosaics and stones, application, in indoor as well as outdoor use.

It is supplied as a dry mix mortar, to which water needs to be added before application.

Features and Benefits

• Ideal for fixing large sized ceramic tiles, porcelain and natural tiles, granite marble on wall and floor.Highly Polymer modified - provides high adhesion, allows to bond with variety of substrates, for fixing a variety of tiles and stones.

• Sag Resistant formula - provides hassle-free application on vertical walls.

• Water & shock resistant - suitable for wet areas & commercial floor too.

• Sustains heat ageing - making it ideal for high temperature locations and for hot temperature applications,like Jacuzzi, sauna etc.

• Low VOC - for healthy living.

• Self-curing properties, which allows for no-hassle application,with minimum labor.

Areas of Application

• Floor and walls, for internal area, for external area.

• Fixing heavy stones, granites, marbles, vitrified tiles on walls & floor surfaces.

• Dry & wet area like saunas, spa, fountains, domestic applications

Coverage

• Marble 2-2.5 sq.mt. For 20kg bag @6mm thickness.

• Glass tile 5-5.5 sq.mt. For 20kg bag @3mm thickness.

• Glass mosaic 7-8 sq.mt. For 20kg bag @2mm thickness.

• Coverage will vary depending on trowel notch size, type, size of tile and substrate smoothness and evenness

Technical Data

Packaging

20kg BOPP laminated bags.

Storage / Shelf life

• Tile Adhesive may be stored for up to 12 months in its original packaging in a dry place.

• Production date is displayed on the packaging.

• Maximum 20 craft bags should be overlaid for storage.

Usage Instruction

Surface Preparation

• The surface must be cleaned thoroughly, with no loose particles or dust.

• The surface must be structurally sound, clean and free from dirt, oil, grease, efflorescence and any other contaminant which could impair the natural bond.

• Surface defects such as cracks, holes or voids should be repaired prior to application

Mixing

• Add 3 – 3.5 parts of powder to 1 part of water or 5 - 6 litre water for 20kg powder in a clean mixing vessel.Adjust the water as per desired consistency.

• Mix with a suitable mechanical stirrer or slow speed drills (50 - 100 rpm) until a lump free homogeneous paste is obtained.

• Always mix required quantity, which can be consumed within pot life.

• Leave mixture for 5 minutes before use. No further water should be added.

Precautions

• Always add powder to water.Do not add excess water than recommended.

• Never add sand & cement at site. Do not use on wet screed. Surface must be fully cured.

• Do not use the adhesive to correct surface irregularities greater than 15 mm.

• Protect from direct rainfall/ foot traffic for at least 24 hours.

• Leave gap between the tile & fill gaps with tile grout.

• Designer/ applicator must evaluate the use of an additional mechanical fastening system for extra security for high height (such as steel hooks fastened to the substrate