SKY TILO WALL

C1TE Category

Superior Bond Strength For Fixing Tiles

SKY TILO WALL Tile adhesive is a cement-based adhesive formulated for the use on interior and exterior walls and floors, for both thick and thin bed applications.

It is suitable for the fixing of ceramic, natural stone, brick, certain mosaics and clay tiles to cement render, screeds, concrete and plaster surfaces up-to 7 feet height.

It is supplied as a dry mix mortar, to which water needs to be added before application.

Packaging

20kg BOPP laminated bags.

Features and Benefits

  • Ideal for fixing ceramic tiles, porcelain and natural tiles, (granite & marble on floor) on wall and floor.

  • Polymer modified provides high adhesion, allows to bond with variety of substrates, for fixing a variety of tiles and stones.

  • High adhesion strength

  • Longer open time with slip resistant properties

  • Good work-ability for easy and fast application

  • Single component product, only water to be added

  • Self-curing properties, which allows for no-hassle application,with minimum labor.

Areas of Application

  • Tile on tile application, tile on concrete.

  • application on vertical walls up-to 10 feet height.

Coverage

  • Ceramic and mosaic tile 5-5.5 sq.mt. For 20kg bag @3mm thickness.

  • Ceramic and mosaic tile 7-8 sq.mt. For 20kg bag @2mm thickness

  • Marble 2-2.5 sq.mt. For 20kg bag @6mm thickness.

  • Coverage will vary depending on trowel notch size, type, size of tile and substrate smoothness and evenness.

Technical Data

Usage Instruction

Surface Preparation And Mixing

  • Surface to be tiled must be clean, free from contamination and in SSD (Saturated Surface Dry) condition.

  • Mix Tile Adhesive into water until a lump free mortar consistency is achieved.

  • Approx. 5.5-6 ltr. of potable water is required for a 20 Kg bag of tile adhesive. Use slow speed stirrer(500RPM) to get uniform lump free consistency.

  • Apply tile adhesive on the wall or floor using trowel at a thickness of 3-6 mm and comb with notch trowel. Do not spread in more than 1 sq. m of area at a time.

  • The Fix tiles firmly into position with a sliding motion and hammer gently with soft mallet to assume a better bond.

  • Leave adequate & desirable joints between the tiles by using spacers

  • Clean off excessive adhesive between the joints & on tiles with a damp cloth

  • The tile joints can be filled after 24 hours of application of tiles.


  • Always add powder to water.

  • Do not add excess water than recommended.

  • Never add sand & cement at site.

  • Do not apply directly on damp surfaces

  • Grouting should not be done for at least 24 hours

  • Do not use for fixing heavy stones, marble, granite etc on vertical areas.

Precautions

Storage / Shelf life

  • SKY Tilo Wall Adhesive should be stored in a dry place. Shelf life is 12 months.